Manhattan, IL · Epoxy Floors

Epoxy Flooring in Manhattan, IL

Epoxy and polyaspartic floor coatings for Manhattan, IL garages, basements, and shops — diamond-ground, crack-repaired, and most installs finished in about a day. Free estimate.

Serving Manhattan & nearby suburbs
Free Estimate
Get Your Free Manhattan Estimate

Honest quote in about 24 hours. No pressure.

20+ years · Diamond-grind prep · Workmanship warranty

Looking for epoxy flooring near you in Manhattan, IL? We coat garage floors, basements, patios, and commercial slabs across the village and the rest of Will County. Every job starts with diamond-grind prep and a moisture test, so new-construction and older slabs hold up to road salt and freeze-thaw. See our garage floor epoxy options.

Updated June 2026
What We Do

Epoxy & Polyaspartic Floors, Installed Across Manhattan

Yes — we serve Manhattan, IL and the rest of Will County. One local crew handles the whole job: diamond-grind prep, full crack and spall repair, and a salt-ready flake or solid finish built to outlast Illinois winters. Here's what you get.

Done in About a Day
Most two-car Manhattan garages are prepped, coated, and back in use in roughly a day.
Built for Salt & Freeze-Thaw
Diamond-ground bond + polyaspartic topcoat that shrugs off Will County road salt, freeze-thaw, and hot tires.
Hundreds of Colors
Flake, metallic, quartz, or solid color — pick the exact look for your garage, basement, or shop.
Honest, Up-Front Quote
A clear written estimate in about 24 hours. No pressure, no surprise add-ons.
Get My Free Manhattan Estimate
Why Manhattan

Manhattan Has Two Garage Problems — We Handle Both

Manhattan has two very different garage problems, and we coat both. The village has grown from a small rail town into one of Metra's farthest SouthWest Service outposts, so half the slabs we see are fresh new-construction pours in subdivisions like Stonegate and Brookstone Springs — concrete that's still curing and needs a moisture test before any coating goes down.

The other half are the older ranches, bungalows, and Cape Cods near the US-52 core, where 1980s and 90s slabs are pitting and spalling after years of Will County road salt. Diamond-grind prep fixes both — it opens a green slab for a clean bond and grinds a tired old one back to a sound surface before we rebuild it.

A Representative Manhattan Project

Flake Garage Floor Near Hanover Estates

Here is a representative Manhattan project — the kind of job we do most in this area. In the Hanover Estates area (east of Cedar Road, south of Baker Road), a homeowner with a roughly 480 sq ft two-car garage on an early-2000s slab wanted a finish that wouldn't peel where the car drips melt-water and salt slush all winter.

The fix: we diamond-ground the slab, repaired two control-joint cracks and a spalled patch near the overhead door, then broadcast a full flake (chip) finish over an epoxy base with a polyaspartic topcoat — UV-stable, hot-tire resistant, and walkable in about a day. The blend was a charcoal-and-tan flake chosen to hide road grime. Want the same on your garage? See our garage floor epoxy page.

Flake Garage Floor Near Hanover Estates — Naperville Manhattan epoxy flooring

Finishes We Install in Manhattan

Pick the look — hundreds of color blends across every finish. Tap any finish for details and photos.

Pricing

What Does It Cost in Manhattan?

Most Manhattan floors run about $5–$12 per square foot — a two-car garage often lands around $2,500–$6,000 depending on size, slab condition, and finish. Those are typical market ranges, not a quote: every slab is different, so every price path ends at a free, honest estimate.

See epoxy floor cost in Naperville, IL

Which System?

Epoxy vs. Polyaspartic

For most Manhattan garages we use a hybrid: an epoxy base coat for thickness and adhesion, plus a polyaspartic topcoat that cures fast, won't yellow in the sun, and handles Will County salt and freeze-thaw better than straight epoxy. Most installs finish in about a day.

Compare epoxy vs. polyaspartic
Our Work

Flake & Coating Finishes We Install

A few finishes we have installed across Will County and the Lincoln-Way suburbs. Swipe through — and ask for more at your free Manhattan estimate.

Where We Work

Neighborhoods We Serve & How We Get There

From our shop at 1750 W Ogden Ave in Naperville, we run I-355 south to I-80 east, then down US-52 / Route 53 into Manhattan — roughly 40–45 miles, about 50–60 minutes. We cover the whole Lincoln-Way side of Will County, so a Manhattan estimate is a normal route day for our crew, not a special trip.

We coat floors throughout Manhattan's newer and established neighborhoods — the new-construction garages in Stonegate and Brookstone Springs (west of Eastern Avenue, south of Smith Road), the homes around Sunset Lakes (south of Baker Road, west of Kankakee Street), and the established streets of Hanover Estates and Leighlinbridge. Anywhere along the US-52, Cedar Road, and Baker Road corridors, we are an easy drive away.

Why Us

Honest Quotes, Prep That Lasts

For more than 20 years we have coated garage, basement, and commercial floors across Will County and Chicagoland — built on one promise: honest quotes and quality prep that actually makes a floor last. We diamond-grind every slab, repair it properly, and stand behind our work.

No high-pressure sales, no vague numbers, and no shortcuts on the prep that matters.

20+ years coating Chicagoland floors
Diamond-grind prep & crack repair on every job
Workmanship warranty on every floor
Honest, up-front estimates — usually within 24 hours

FAQ

Manhattan Epoxy Flooring FAQ

Free, No-Pressure Estimate

Get a Free Manhattan Epoxy Floor Estimate

Tell us about your Manhattan garage, basement, or shop and we'll send an honest, detailed estimate — usually within about 24 hours. Most installs are done in about a day.

(630) 326-6456  ·  Mon–Sat · 9am–5pm
1750 W Ogden Ave, Naperville, IL 60540

Free Estimate
Get Your Free Manhattan Estimate

Honest quote in about 24 hours. No pressure.

20+ years · Diamond-grind prep · Workmanship warranty